4B - 55/54 Highland Corporate Center,
4th Floor Next to Big Bazaar Kapurbawadi Thane ( w ), Maharastra 400601
24x7 Open
[titles text=”T3VyJTIwVXNlcnM=” type=”h2″]
[titles text=”U21hcnQtVVBTJTIwT24tTGluZQ==” type=”h2″]

Inva Tubular


Exide INVA Tubular 400, 500, 550 & 650

Features
Ironclad® Tubular Technology
Resistance to abuse
Electrolyte level indicator
Tower type design
High Acid volume per ampere hour
Common Side Venting
Deep cycle design
Conforms to IS 13369-1992
Advantages
Very long life
Can withstand overcharge better
User friendly
Occupies less floor space, totally new look
Acid volume per ampere hour is 30% more than that of ordinary tubular batteries. It acts as a coolant and also ensures very low maintenance
Less pollution, environment friendly
Suited for use in areas of frequent power cuts (800 to 1000 cycles of deep discharge as against 300/400 cycles of other batteries)
Ensures consistent quality
Application
The next generation Tubular battery designed specially for withstand long and frequent powercuts. It is the ultimate Inverter battery.
[titles text=”VGVjaG5pY2FsJTIwU3BlY2lmaWNhdGlvbiUzQSUyMA==” type=”h2″]

Model

Capacity at 270C when discharged at C20 up to 1.75 vpc (1.280 sp. gr)

Dimension (+/-3mm)

Weight
(Kg +/-5%)

Volume of Electrolyte
(1.220 Sp. Gr) Liters

Initial charge Minimum AH input (AH)

Initial Charge of Constant Current (A)

Constant Potential Limiting Current (Amps)

Trickle Charge
(Current in mA)
 

Length

 

Width

 

Height*

 

Dry

 

Filied

Start (upto 2.36 vpc) Finish (upto 2.75 vpc)  

Min.

 

Max.

IT 400

110 Ah

506

220

257

29.10

43.35

11.40

450

12

6

25

100

400

IT 500

150 Ah

500

187

430

33.80

60.05

23.80

540

14.4

7.2

30

120

480

IT 550

165 Ah

500

187

430

35.80

60.80

20.00

610

16

8

34

135

540

IT 650

200 Ah

500

187

430

45.00

72.00

21.60

720

19.2

9.6

40

160

640

*At 270C when discharge at C20 upto 1.75 vpc

Higher Discharge Rates (Optional)

Hours

10

5

3

1

Capacity Ah IT400

100

83

72

50

IT500

120

100

86

60

IT550

135

112

97

68

IT650

160

133

115

88

Initial Charging Instructions
  • Filling in Specific Gravity : 1.220 +/ – 0.005 at 27º C
  • Rest Period : 10-12 hrs
  • Minimum Ah input : 450 Ah for IT400, 540 Ah for IT500, 610 Ah for IT550 and 720 Ah for IT 650
  • In order to reduce the charging time, the following routine may be adopted. For IT400, the initial charging current may be 12A upto 2.36vpc followed By 6A upto 2.75 vpc. For IT500, the initial charging current may be 14.4A upto 2.36vpc followed By 7.2A upto 2.75 vpc. For IT550, the initial charging current may be 16A upto 2.36vpc followed By 8A upto 2.75 vpc. For IT 650 , the initial charging current may be 19.2A Up to 2.36vpc followed by 9.6A upto 2.75vpc.However in both cases, minimum Ah to be given. Under the circumstances, Battery temperature should not exceed 50ºC. In case the temperature exceeds 50ºC Adequate rest to be given till the electrolyte temp. comes to ambient temp. and charging to be continued.
  • Conditions of fully charged
    • 3 consecutive hourly readings of specific gravity and voltage become constant
    • Top of charge voltage will e around 16.2V – 16.5V.
    • All cells should gas freely
    • Minimum Ah has been given.
  • Specified gravity of fully charged condition : 1.250 +/ – 0.005 at 27º

 
Normal Recharging Instruction

Recharging through Inverter at constant potential mode of 14.4V with limited current as specified. After battery potential matches 14.4V, the battery should continue in trickle charge made at constant potential of 13.8V.

 
Statutory Notice

All batteries contain lead, which is harmful for humans and environment. As per statutory requirements, the used battery must be returned to the authorized dealer, manufacturer or at the designated collection centres.